Components & Trim
Bring your panels together with durable, quality trim
Metal panels are only the first piece of a metal roofing system. Metal flashing or trim brings the metal panels together and is usually required by code. We produce trim in 10’ sticks and stock most standard colors and styles. We use computerized machines to manufacture our trim and are able to produce just about any custom shape you might require.
Most building codes require trim to be a minimum 26ga – all of our standard trims are stocked in 26ga to make it more convenient for you.
Where metal panels meet at the top of a roof, a ridge cap is used to provide a watertight connection. Butyl tape/sealants, closures (for exposed fastener), and zee flashing (for hidden fastener) are also available. The same ridge cap trim can also be used as a hip cap.
The bottom edge of a roof section is protected by eave drip and fascia metal (in some cases). Butyl tape/sealants, and closures (for hidden fastener) are also available.
Where the long side of a panel meets the side of the roof section a gable rake trim is used to seal the panel edge. Butyl tape/sealants, and zee flashing (for hidden fastener) are also available.
Where two slopes meet at a low point, a valley flashing is required to provide a continuous drainage path. Butyl tape/sealants, expanding foam (for exposed fastener) and panel starters (for hidden fastener) are also available.
Sidewall and endwall trims are installed to provide a watertight transition between a wall and roof section. Butyl tape/sealants, closures (for exposed fastener), and zee flashing (for hidden fastener) are also available.
Gambrel and transition flashing is used where roof sections change slope. Butyl tape/sealants, closures (for exposed fastener), and zee flashing (for hidden fastener) are also available.
Zee flashing is a common component for hidden fastener trims. Rivets with matching paint colors are also available.
J-channel, drip cap, and drip angle are common wall trims; we also carry outside/inside corners, and other wall trims.
Custom
If it is made from steel or aluminum sheet metal, we can most likely fabricate it. We make custom metal for interior accents, shingle roofs, flat roofs, and any other use you can imagine. If you can sketch it, we’ll see if we can build it.
The Roof Talk blog
Gulf Coast Supply Ready to Serve Valdosta, Georgia After Hurricane Helene
Valdosta, GA – In the wake of the devastation caused by Hurricane Helene, Gulf Coast Supply
Governor DeSantis Issued Executive Order – Language Required in Roofing Contracts
Governor DeSantis Issued Executive Order – Language Required in Roofing Contracts The Governor’s Executive Order #24-208,
Gulf Coast Supply Promotes Senior Leadership
Gulf Coast Supply & Manufacturing, the trusted name for metal roofing for over 25 years, is
We're here to helpTell Us About Your Project
Our goal is to be present for our customers from start to finish. We are happy to talk with you about product questions, provide a free quote, or send over samples.
